Konica KM1024 LNB 42PL Printhead

In Stock

This Print Head is a robust, shear mode, piezo on-demand print head


Konica KM1024 LNB 42PL Printhead

This Print Head is a robust, shear mode, piezo on-demand print head that is usable in both binary and 8 level greyscale mode, providing variable drop size and higher print quality without the use of additional print heads. It is a vast improvement over the KM512 print head series, offering twice the print width and double the level of greyscale. Konica Minolta piezo on-demand inkjet heads are driven using lower voltages than other inkjet heads and the new actuator used in the KM1024 reduces power consumption even further. It has 1024 nozzles with a droplet size of 42 pico litre and a native resolution of 360 dpi. The print head is compatible with oil based and solvent inks. This print head is also known as the Konica Minolta KM1024 LNB. 

This Printhead is used for white ink on Agfa printers.

To be used with:

Agfa :Anapurna M2540 FB / :Anapurna M2050 / :Anapurna M1600, Allwin S16 / C8 / C12, Dilli Neo Titan FB2513-06DW

Remarks: Original

Please login to review


Technology On-Demand Piezo Electric (Shared Wall 3 Cycle)
Native Resolution 360 dpi
Cal. Droplet Size 42 pico litre
Max. Drops in Greyscale 8 drops
Tot. Amount of Nozzles 1024 (512 nozzles per line)
Nozzle Spacing 70.5 microns
Print Width 72 mm
Firing Frequency 6.7 kHz
Ink Compatibility Oil based and Solvent Inks
Heater not integrated



1. The printhead is required to be installed by professional persons. 
2. Due to the nature of Printer Parts and the many factors that go into installing them, we do not accept returns or give refunds on electronic or service parts. Once the package is delivered, it is the customer's responsibility to check the package for damage. If there is any visible damage on the package, please refuse the shipment and call us at (+91) 91-9654382384 or send email to contact@hgsmachines.com
3. Please seriously pay attention on information of printhead model while purchasing from us. Once received your item, please inspect if the printhead matches up with the model you required.If you have any problems, it is very important that contact us as soon as possible beforeinstalling it onto machine. Please be aware that we don't accept any return and refund once the printhead is installed on the machine.

Back to top